Sparkly Butterfly Ring Project

We have been beading again today here at CJ Beaders and we have a nice simple project for you all to try.

 What you will need for this project is:

1 x Tube of E6000 Glue

2 x packs of pp14 Chatons

1 x Butterfly ring blank

or buy our kit 

Tools needed:

Fine pick and place tool

Instructions

We hope you enjoy this project!

Make this pretty summer time bracelet.

We have been busy making new things today and this is one of the bracelets we have made. 

Here is how to Make it!

All these items can be found on our website at www.cjbeaders.co.uk

Tools you will need are:

Cutters

Round nose pliers

2 x Chain nose pliers (or you can use a pair of flat nose pliers)

Split ring pliers

7.   Repeat these steps until all the pieces are joined together. Now you can slightly bend the rubber tubing           so it forms nicely around your arm. The bracelet should have 2 of the 10mm beads on either end this is         where you will attach the toggle clasp.

8. Attach the toggle clasp using a jump ring, 

All beads, findings and  tools can be found on our website at www.cjbeaders.co.uk

Wire Wrapper Pendent.

All you need to make this wire wrapper pendent is

Beadalon 21.8mm round Artistic Wire wire wrapper

24 and 28 gauge Beadalon Artistic Wire

10 x 4mm Preciosas bicones

1 x 22mm round resin sugar stone bead

1 x necklace chain 

 Wrap the Bicones around the edge of the wire wrapper into the recesses of the wrapper, using the 28 gauge wire. Next place the sugar stone in the centre of the wire wrapper and wrap into place using the 24 gauge wire. Start the wrap on the top right leaving some spare wire to secure later. Count every 4 Bicones and wrap the wire again, continue every 4th Bicone to create the star pattern. Once the star is completed twist and tuck in loose ends at the back of the wire wrapper. Attach to necklace chain.

The pendent takes 15-20 minutes to complete.